Jewelry-making at home is an art. Only a few people have the flair to start one and expand it. If you are reading this article, I am sure you are probably trying to set yours too. Amongst other things, Flush cutters are integral to making your jewelry pieces. In basic terms, a flush cutter is a wire cutter. While creating your intricate items, you need to trim and cut the wire. This gets you the perfect finish that you are looking at.
Unfortunately, a standard wire cutter does not fulfill your needs. It would help if you had something more precise and targeted towards the job. A flush cutter creates a smooth, neat, and perfect cut. The best part is that you may not only use it for jewelry cutting. These same flush cutters help cut cables and electronic wires.
Again, that brings us to the question of which Flush cutter is the best for use. Mostly there are two types of flush cutters available. One is the standard flush cutter, which has only basic features like a flat or beveled blade. On the other hand, Super ultra-flush cutters are innovative and require less pressure. They also reduce the stress you have to put on the wire. If you will do good wire cutting, the second category is what I will suggest for you.
Don’t fret; I will share some suggestions for the best flush cutters for jewelry making. This list has products that do their job rather well. Hopefully, you could pick your product after going through the list.
Table of Contents
Best Flush Cutters for Jewellery Making
With 32760 | ESD Flush Cutting Diagonal Cutters- Non-slip grip Flush Cutter
Made of steel alloy, the Wiha 32760 can bear any pressure. The product has a low-wear lap joint built to handle wire-cutting tasks. The cutter is riveted to give the user a better effect of cutting. At .18 pounds, the cutter is relatively lightweight. You do not feel any burden while using the cutter.
However, its non-slip grip is a significant advantage. This stops the product from slipping from your hands, especially while working on something crucial. The cuts are relatively clean, so you do not have to worry about your work getting spoiled. Alongside the additional induction, hardening offers durability. The cutter is going to last you for some years, at least.
The front portion of the cutter is made of C70 tool steel. There are limited chances of rust or any other issue cropping up. Plus, the cutter is exceptionally sharp, so the cut is made quickly.
IGAN-170 Wire Cutter-Strongest Flush Cutter
This wire utter from IGAN is one of the most robust products available. It has an 11 mm prolonged heat-treated steel jaw to cut even the toughest cables. The angled head design is different from others and helps twist your wires as you please.
The professional quality flush cutting snips provided can be used for multiple tasks. So, you may use it for electrical jobs and other tasks quickly. The flush cutter’s design is compact, and you can use it for working in small spaces. An environmentally friendly product is made of TPE material, which is non-toxic. The grip is comfortable, giving no stress to your hand.
The flush cutter is strong enough to cut any wire. Use it to cut small wire, vape wire, beading wire, zip ties, plastic, and others. However, do not use the product to cut hard or big gauge wires to ensure a long life.
Hakko Micro Cutter
The Hakko micro cutter comes with an 8 mm long jaw. It has an angled head for better precision in cutting copper and soft wire. The 2.5 mm heat-treated carbon steel construction is high on looks. It also tends to give strength and durability to the product in question.
The ground, holes, and surfaces ensure that the product moves smoothly. When working on jewelry, you would not want any jerks or sudden disruptions in movement. The handgrips of this product are made in the Dolphin style. They are non-slip in nature, and you also get a comfortable grip. When you proceed with the job, there are minimum chances of the cutter falling from your hand.
Another feature of the flush cutter is the parkerized surfaces that make it corrosion-resistant. This also reduces glare and helps you proceed with your job without any hurdles.
IRWIN VISE-GRIP Wire Stripping Tool-High in Sharpness Cutter
One unique feature that makes this tool stand out is its sharpness. It has an induction hardened jaw that is quite efficient and sharp. So, whatever the device’s purpose, the work would be done without any hassles.
The nose of the cutter is like a plier. It allows you to loop your wire and move it as per your intentions. With this feature, you can even pull the wire from one side to another.
There is a bolt cutter given that cuts the bolts to size. As a result, you get the perfect lead thread for use. The comfortable and textured handles see that you do not feel any fatigue in hand.
Klein Tools 11063W Wire Cutter- Premium Range Flush Cutter
The Klein Tools wire stripper and cutter can easily cut and strip any thickness wire. Though this is slightly on the high-priced side, the product justifies the cost. It has a compound action stripping grip allows the user to grip and strip the wire.
All this can be done only in one single movement. So, your work is accomplished within no time. Its precision machine stripping holes easily remove the insulation. You are not required to make an extra effort in doing so.
The cutter’s working can remove up to 1-inch of insulation in one go. Its tension-loaded wire grip can hold the cable while maintaining the cable geometry. The cast alloy chassis with a heavy-duty finish keeps corrosion away. It also gives strength to the cutter to last you for some years, at least.
Xuron 2175 Maxi-Shear Flush Cutter- Best for Jewellery Making
The quality of this product is top-notch. Everything from the material to the design has been taken care of. Plus, the product is simply the best for jewelry-making tasks. Its soft flex and tiger tail beading wire have many steel cables twisted together.
This cutter is the most suitable for you if you also do beading. The geometry of the cutter edge of the product allows very flush cuts. In most cases, your work would be neat without any mess being left behind.
If you are cutting a bronze or sterling wire, ensure it is less than 10 grams. Unnecessary trying to cut a large-weight wire can cause the cutter to break.
IGAN-330 Wire Flush Cutters-Cost Effective Flush Cutter
The cutter can achieve deep cuts with a 13 mm long upgraded jaw. It can easily cut copper and soft wire up to 2.0 mm in depth. This ensures very sharp cuts and that too without strenuous effort. The price is pretty low, making it one of the most cost-effective cutters.
The material used is heat-treated chrome vanadium steel. The use of the strength of this grant to the cutter. It can thus endure any full stress cuts that you have to make. You can call this cutter the most robust 5-inch cutter available on the market.
The cutting jaws are long and can make fast cuts even in small spaces. An opening spring is given, which reduces the pressure you have to apply. An ergonomically designed rubber handle provides a firm grip and reduces the chances of slippage. Along with the product, there is a 12-month warranty from the manufacturers’ side. The customer service is also exceptional and reverts in case of any problems with the item.
Kaisi KS-107 Flush Cutter- Comfortable Wire Cutter
Comfort is the highest consideration for this flash cutter. It has a hardened carbon steel construction. This lends strength and durability to the product. You may use it for a long time.
The handle given has a PVC coating, which provides a comfortable grip. Even after prolonged use, there is no feeling of discomfort in the hand. With its strong jaws, you may also cut corrosive wires and hard-to-take-out screws.
The high-quality material used also makes the product anti-glare. It is corrosion-resistant, and you do not have to worry about that problem. The product is suitable for use in multiple cases. It can cut small iron wires, trim plastic wires, electric wires, and electronic repairs.
Hakko Micro Soft Wire Cutter-High Precision Flush Cutter
This flush-cut micro soft wire cutter is exact when making cuts. Hardly any of the cuts would go wrong in this case. It has a 21-degree angled cutting surface that can easily cut even terminal wires.
The 2.5 mm heat-treated carbon steel construction makes the build of the cutter durable. You can easily use the product for many years without facing wear and tear.
Alongside the precision, holes and surfaces provide smoothness to movement. There would be no jerks or obstructions when you do your cutting job. A curved fore-edge is guaranteed to give you substantial control. The dolphin-style handgrips make it a comfortable product to use. Parkerized surfaces of the blades make them corrosion-resistant.
Flush Cutters Buying Guide in the USA
The flush cutter is an essential product for those in the jewelry industry. Most of them come in the average price range and can sustain pressure while used. It is always wise to buy a cutter that is not made of flimsy material. You would not want your flush cutter to break in the middle of your work.
On the other hand, comfort is also an important aspect you must keep in mind. Those flush cutters with PVC handles tend to give you a firm grip. Even after prolonged use, you will not feel any strain on your hand. Since you are using the product for a long duration.
I have reviewed those products that are the most popular in the flush cutter category. However, you should always know what factors govern your choice. Read on to learn what parameters to judge before picking the most suitable product.
Purpose
Firstly, you must know for what purpose you are looking for a flush cutter. Xuron 2175 Maxi-Shear Flush Cutter can be a great choice if it is only for jewelry. However, most of the rest products can cut other types of wires. Also, if you have to carry the cutter everywhere, you should pick one small and easy to carry. A massive and cumbersome product is going to make things difficult for you.
Quality of the blades
Always remember that the blade’s material has to be stronger than the wire that will be cut. If you want to cut thick metal wire, use a cutting-edge cutter. On the other hand, for thin metals, you may use any flush cutter. Don’t use a steel blade to cut aluminum and copper wires. If you try, it will miss, but the product might get damaged after some time. So, first, figure out what you want to cut and then decide the material of the blade used.
Handles
If you have already used a flush cutter, choose another one with a similar handle. This would reduce the time that you spend understanding its posture. Choose a cutter with metal handles but not those with wood and plastic handles. This is because you will find it arduous to apply the pressure with handles made of such material. However, the cover should be rubber or hard plastic to give you a firm grip while using. You would not want your hand to feel any discomfort.
Operation style
No one has the time to keep working with a difficult-to-use item. Check the product you like to know how easy to use it is. Most of the above products come with instructions on setting up and use. Decent work would require you to apply minimum pressure and get the best outcome.
Warranty and customer service
If the product does not work as per expectations, you could look for a product that gives a warranty. The details of the warranty are disclosed along with the product details. Apart from that, the manufacturer’s customer service should be excellent. If you need any help with using the product, there should be reps to attend to your request. Always check this criterion to avoid getting stuck when the product is not delivered.
Price
The flush cutters are available at every price point. But being expensive does not mean you will get superior quality. The need for which you are looking for a flush cutter should be fulfilled. You would not want to buy something that is incapable of cutting the basic wires. If you know what you are looking for, finding a product in the ideal price band would be easy.
FAQ’s
What is the difference between a flush cutter and an angle flush cutter?
A flush cutter would give a flat cut on one side and a diagonal cut on the other. On the other hand, an angle flush cutter will provide a diagonal cut on both sides.
Do professionals use these tools to make their jewelry?
Yes, most of them use these flush cutters for the necessary jobs in jewelry-making that they have to do. However, a few flush cutters are better at this job than others. It is best if you try and find those for yourself.
Can I use the flush cutter for cutting gauges?
Yes, a flush cutter can help you cut up to 18 gauges. However, refrain from putting too much strain on the same, which could cause breakage.
Can flush-cutters cut in small spaces too?
Some of the products reviewed are excellent in small spaces. They can do all the cutting without you feeling any strain. Pick your product from any of the ones mentioned above.
Conclusion
After all the research, the above listing would give you an idea of the best product in the flush cutter category. As I have said, all the flush cutters are lightweight, so you do not have to worry about that aspect. Without thinking much, the Hakko micro cutter is the right choice. Lots of users have trusted the product making it the bestselling flush cutter.
However, choose Hakko Micro Soft Wire Cutter if you want cuts to be exactly like you want them. On the other hand, the Xuron 2175 Maxi-Shear Flush Cutters are best for jewelry-related jobs. If you wish for your flush cutter to handle only jewelry tasks, consider purchasing the same.
Whichever product you pick, go through its details to decide finally. Any rushed decisions would only make working with the product tough for you.
4 comments